HDPE Material 63mm UPP hose Underground Pipe for Gas Station

Home » Products » Fuel Station » Fuel Station Equipment » UPP » HDPE Material 63mm UPP hose Underground Pipe for Gas Station

Share to:

HDPE Material 63mm UPP hose Underground Pipe for Gas Station

- Ecotec Fueling System
Eoctec pipework utilises the advanced electrofusion welding process to effectively bond system components together into one leak proof system.
- Quality Material with High Standard

High Density Polyethylene (HDPE) pipes are produced in size up to 2500mm in diameter, with nominal pressure rating PN4, PN6, PN10, up to PN25 (other pressure ratings also available). All pipes and fittings are manufactured in accordance with current EN12201, DIN 8074, ISO 4427/ 1167 and SASO Draft No.5208.

Model:
ET-upp
Brand:
ECOTEC
Code:
ET-WB

Availability:

Quantity:



Inquire Add to Basket

Product Description

Products Description

Upp Pipes and accessories in guangzhou Elbows Upp Pipe Elbows Joint

- Ecotec Fueling System

Eoctec pipework utilises the advanced electrofusion welding process to effectively bond system components together into one leak proof system.

- Quality Material with High Standard

High Density Polyethylene (HDPE) pipes are produced in size up to 2500mm in diameter, with nominal pressure rating PN4, PN6, PN10, up to PN25 (other pressure ratings also available). All pipes and fittings are manufactured in accordance with current EN12201, DIN 8074, ISO 4427/ 1167 and SASO Draft No.5208.

Advantage of Ecotec UPP Pipe

• Material: HDPE with EVOH resin barrier • Primary pressure rating (bar/psi): 10/145 • Primary colour: Black with two clusters of four green stripes, clear inner liner • Temperature rating: Class T1 Rating (EN14125:2013) -40 °C to 50 °C • Primary vacuum rating (-bar/"Hg): -0.9/-26.6

• Complete accessories suit for diffent station design

• Economic price with high quality

Primary Piping (Single Layer Solution)

Secondary Piping (Double Layer)

Products Specifications

PE100-RC Super Tough Polythylene Pipe Physical and Mechanical Properties
No.	Performance	Unit	Requirement	Requirement	Requirement
1	Hydrostatic strength	h	No damage, no leakage	20℃, 12.0MPa , ≥100h	GB/T 6111
				80℃,5.4MPa,≥165h
				80℃, 5.0MPa,≥1000h
2	Elongation at break e≤5mm	%	≥350b,c	type 2d 100mm／min	GB/T 8804.3
	Elongation at break 5mm＜e≤12mm			type 1d 50mm／min
	Elongation at break e＞12mm			type 1d 25mm／mintype 3d 10mm/min
3	Slow crack growth resistance (pipe cone test)） en≤5mm	mm/48h	<1	80℃	GB/T 19279
4	Slow crack growth resistance (pipe notch test) en＞5mm	h	failure time ≥8760	80℃,0.92MPa (test pressure)	GB/T 18476
5	Full incision creep test（FNCT）	h	failure time ≥8760	80℃,4.0MPa,2% nonylphenol polyoxyethylene ether solution	DIN/PAS 1075
6	Point load test	h	failure time ≥8760	0℃,4MPa,2% nonylphenol polyoxyethylene ether solution	DIN/PAS 1075
7	Fast Crack growth resistance（RCP)	Mpa	Pcs≥MOP/2.4-0.072	-	GB/T 19280
8	Compression Recovery	-	Pcs≥MOP/2.4-0.072	0℃	GB／T 15558.1-2015
9	Thermal stability	min	>20	200℃	GB/T 19466.6
10	Thermal stability（MFR）	g/10min	change before and after processing ＜20％	5kg,190℃	GB/T 3682
11	Longitudinal retraction (wall thickness ≤16mm)	%	≤3，no surface damage	110℃,200mm,1h	GB/T 6671

REMARK:

A. Only brittle failure is considered. If ductile failure occurs before 165h, the lower stress and corresponding minimum failure time are selected according to the standard to re-test.
B. If the damage occurs outside the standard distance, the test is considered to be passed if the test value meets the
requirements.
C. When the required test value is reached, the test can be stopped without the need to test until the sample is damaged.
D. If feasible, pipe with wall thickness not greater than 25mm can also be used type 2 sample, type 2 sample by machining or molding method.
E. For pressure values corresponding to other SDR series, see GB/T 18476.
F. The RCP test shall be performed only when the pipe produced by the pipe manufacturer is greater than the wall thickness of the pipe used in the RCP test provided by the mixed ingredients manufacturer. When applied below 0 ° C, RCP tests are required at this temperature to determine the critical pressure at the minimum operating temperature.
When testing according to GB/T 19280, if the S4 test fails to meet the requirements, the test should be re-tested according to the full-size test, and the results of the full-size test should be used as the final judgment basis. In this case,

Company Profile

WENZHOU ECOTEC ENERGY EQUIPEMNT CO., Ltd as a professional supplier of Petroleum equipment, Energy device, can offer customer the better products with better price. Ecotec Energy is founded in 2019, but the Ecotec team are all with experience for over 10 years. We can offer package service from Design, Manufacturing, Delivery to after-sale service, and we have exported to over 60 countries now, also have agent in Africa, Middle East, Asia and South American countries. Customer and Dedication is what we standarding for, we will alwasy focus customers need, and struggle for it, Looking forward to cooperate with you!

Exhibition

Ecotec frequently participate in exhibitions around the world to strengthen contact with customers and provide better services

Certifications

Ecotec produce products with higher standards than the industry, and have been certified by relevant institutions and have a variety of certificates.

Packaging & Shipping

Ecotec accept air, ocean, and land shipping, and will choose the most suitable packaging for you according to the shipping
transportation.

FAQ

1. Who are we?
We are based in Zhejiang, China, start from 2019,sell to Africa(30.00%),Eastern Asia(25.00%),Mid East(20.00%),South
America(5.00%),Southeast Asia(5.00%),South Asia(5.00%),North America(5.00%),Oceania(3.00%),Central America(2.00%). There are total about 100 stuff in our office.

2. How can we guarantee quality?
Always a pre-production sample before mass production; always final Inspection before shipment; quick respond after sale and full life tech support.

3.What can you buy from us?
FUEL DISPENSER,LPG TANK,LPG SKID,SUBMERSIBLE PUMP,Container Station

4. Why should you buy from us not from other suppliers?
WENZHOU ECOTEC ENERGY EQUIPEMNT Co., Ltd as a professional supplier of Petroleum equipment, Energy device, can offer customer the better products with better price. Ecotec Energy is founded in 2019, but the Ecotec team are all with experience for over

5. What services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF,EXW,FAS,CIP,FCA,CPT,DEQ,DDP,DDU,Express Delivery,DAF,DES；
Accepted Payment Currency:USD,EUR,CNY;
Accepted Payment Type: T/T,L/C,MoneyGram,Credit Card,PayPal,Western Union,Cash;
Language Spoken:English,Chinese,Arabic